EasyTiler clip: Put it underneath the tile and it becomes middle part between two tiles. It is used only once. After the tile adhesive is dry, lower parts stay hidden underneath the tile, upper part is detached.
EASYTILER is an effective system for evenly laid porcelain tiles, stone or marble.
Do it yourself! Evenly laid tiles with less effort and in shorter time. For professionals and DIY craftsmen.
EasyTiler clip: Put it underneath the tile and it becomes middle part between two tiles. It is used only once. After the tile adhesive is dry, lower parts stay hidden underneath the tile, upper part is detached.
EasyTiler wedge: Enables that two tiles stay evenly laid until tile adhesive is completely dry.
Leveling pliers: For laying bigger surfaces of tiles. Adjustable by the tightening level and for different thicknesses. Two types of pliers: for levelling tiles on floor and on walls.
Spread the adhesive. Adjust the clip under the tile.
Carefully and tightly insert the wedge into the clip slot.
Tiles are now levelled in height. Because of unique clip design it is the perfect system to use with tiles of different thicknesses.
Set the clips and wedges on all four sides of each tile. When laying bigger tiles use two clips on every side of the tile.
Use gumhammer to detach the wedge from the tile by striking it perpendicular on the clip. Clip breaks into two pieces, wedge can be used again.
Recommended number of pieces of EasyTiler clips and wedges for various dimensions of tiles per square meter.
For evenly laid porcelain tiles, stone or marble. Joint thickness: 1/16’’ . Buy this 200-pieces set additionally after you use up all the clips from the basic set.
Higher clip is especially suitable for stone and marble. Joint thickness: 1/16’’. Buy this 200-pieces set additionally after you use up all the clips from the basic set.
Blue, 1/8’’ clip has all the qualities of regular clips, however it is used for achieving a wider joint. Joint thickness: 1/8’’.
Wedges are reusable. Buy them additionally if your surface of tiles is bigger and wedges in the bucket are not enough.
When using a 16”x16” tile this set covers approximately 100 square feet. Packed in a handy bucket to store wedges and clips.
When using a 16”x16” tile, this set will cover approximately 50 square feet. Packed in a handy bucket to store wedges and clips.
Adjustable pliers allow for easy and consistent application of wedges.
Adjustable pliers allow for easy and consistent application of wedges. Angled design for vertical surfaces.0